$ 2,499.00 -20%
$ 1,999.00
Wishlist
Apollo FireWire is one of the world’s most popular professional audio interfaces — delivering the sound, feel, and flow of analog recording to music creators everywhere. A perfect centerpiece for studios running original Mac Pro towers and Windows 7 machines, this 18 x 24 FireWire 800-equipped interface features analog design based on UA’s 50-year heritage, along with gold-standard Apollo A/D and D/A conversion for impeccable audio resolution.
Apollo FireWire further distinguishes itself with Realtime UAD-2 Processing and Unison™ technology, letting you record with near-zero latency through the full range of UAD plug-ins from Neve, Studer, Manley, Lexicon, and more — including new mic preamp emulations from Neve, API and Universal Audio.*
Audio Interface
  • Sample rates up to 192 kHz at 24-bit word length
  • 18 x 24 simultaneous input/output channels:
    • Eight channels of analog-to-digital conversion via mic, line, or high-impedance inputs
  • 14 channels of digital-to-analog conversion via:
    • Eight mono line outputs
    • Stereo monitor outputs
    • Two stereo headphone outputs
  • 10 channels of digital I/O via:
    • Eight channels ADAT Optical I/O with S/MUX for high sample rates
    • Two channels coaxial S/PDIF I/O with sample rate conversion
    • Two FireWire 800 ports for daisy-chaining other FireWire devices
Microphone Preamplifiers
  • Four high-resolution, ultra-transparent, digitally-controlled analog mic preamps
  • Unison™ technology for deep integration with UAD preamp and pedal plug-ins
  • Front panel and software control of all preamp parameters
  • Switchable low cut filter, 48V phantom power, 20 dB pad, polarity inversion, and stereo linking
Monitoring
  • Stereo monitor outputs (independent of eight line outputs)
  • Digitally-controlled analog monitor outputs maintains highest fidelity
  • Front panel control of monitor levels and muting
  • Two stereo headphone outputs with independent mix buses
  • Independent front panel analog volume controls for headphone outputs
  • Front panel pre-fader metering of monitor bus levels
  • S/PDIF outputs can be set to mirror the monitor outputs
Onboard UAD-2 Processing
  • QUAD model featuring four SHARC processors
  • Realtime UAD Processing on all of Apollo’s analog and digital inputs
  • Same features and functionality as other UAD-2 products when used with DAW
  • Can be combined with other UAD-2 devices for increased mixing DSP
  • Complete UAD Powered Plug-Ins library is available online
Front & Rear Panels

The Apollo interface places all the most commonly used recording and monitoring features right on the front panel, for fast, direct access. Similarly, its rear panel provides all the dedicated, high-quality I/O needed for a typical production studio.

Software
  • Console application:
    • Enables Realtime UAD Powered Plug-Ins processing
    • DSP mixer for realtime monitoring and tracking
    • Remote control of all Apollo features and functionality
  • Console Recall plug-in:
    • Saves Apollo configurations inside DAW sessions for easy recal
    • Enables control of all front panel parameters from within the DAW
    • VST, RTAS, and Audio Units plug-in formats
  • UAD Meter & Control Panel application:
    • Configures global UAD-2 and Powered Plug-Ins settings and monitors system usage

 

System Requirements

FireWire Systems

UAD Powered Plug-Ins version 8.7.0

  • (Win) Windows 7, 8.1, or 10 (64-Bit Editions)
  • (Mac) OS X 10.9 Mavericks, 10.10 Yosemite, or 10.11 El Capitan
  • Available FireWire 800 port*
  • 6 gigabytes available storage
  • Internet connection to download software and authorize UAD plug-ins
  • Compatible VST, Audio Units, RTAS, or AAX 64 plug-in host DAW software

*On Windows systems, a qualified PCIe-to-FireWire adapter card is required.
Visit the product compatibility page for details: Apollo FireWire | UAD-2 Satellite FireWire


 

Specifications

Note: The specs below are a subset of the full list. See the Apollo Hardware Manual for complete product specifications.

System
  • I/O Complement
    • Microphone Inputs 4
    • High-Impedance Inputs 2
    • Analog Line Inputs 8
    • Analog Line Outputs 8
    • Analog Monitor Outputs 2 (1 stereo pair)
    • Headphone Outputs 2 stereo (independent mix buses)
    • ADAT Up to 8 channels via dual I/O ports with S/MUX
    • S/PDIF 1 stereo input, 1 stereo output
    • FireWire 800 (IEEE 1394b) Dual ports
    • Thunderbolt (via Option Card) Dual ports
    • Word Clock 1 input, 1 output
  • A/D – D/A Conversion
    • Supported Sample Rates (kHz) 44.1, 48, 88.2, 96, 176.4, 192
    • A/D Bits Per Sample 24
    • Simultaneous A/D conversion 8 channels
    • Simultaneous D/A conversion 14 channels
    • Analog Round-Trip Latency 1.1 milliseconds @ 96 kHz sample rate
    • Analog Round-Trip Latency with four serial UAD-2 plug-ins via Console application 1.1 milliseconds @ 96 kHz sample rate
Analog I/O
  • Microphone Inputs 1 – 4
    • Jack Type XLR Female
    • Phantom Power +48V, Switchable
    • Dynamic Range 118 dB (A–weighting)
    • Signal-to-Noise Ratio 118 dB (A–weighting)
    • Total Harmonic Distortion + Noise –110 dB
  • Hi–Z Inputs
    • Jack Type ¼” Male (Mono TS plug required)
    • Dynamic Range 117 dB (A–weighting)
    • Signal-to-Noise Ratio 117 dB (A–weighting)
    • Total Harmonic Distortion + Noise –103 dB
  • Line Inputs 1 – 4
    • Jack Type ¼”Male TRS Balanced
    • Dynamic Range 117 dB (A–weighting)
    • Signal-to-Noise Ratio 117 dB (A–weighting)
    • Total Harmonic Distortion + Noise –107 dB
  • Line Inputs 5 – 8
    • Jack Type ¼” Male TRS Balanced
    • Dynamic Range 117 dB (A–weighting)
    • Signal-to-Noise Ratio 117 dB (A–weighting)
    • Total Harmonic Distortion + Noise –107 d
  • Line Outputs 1 – 8
    • Jack Type ¼” Male TRS Balanced
    • Dynamic Range 118 dB (A–weighting)
    • Frequency Response 20 Hz – 20 kHz, ±0.1 dB
    • Signal-to-Noise Ratio 118 dB (A–weighting)
    • Total Harmonic Distortion + Noise –106 dB
  • Monitor Outputs 1 – 2
    • Jack Type ¼” Male TRS Balanced
    • Frequency Response 20 Hz – 20 kHz, ±0.1 dB
    • Dynamic Range 115 dB (A–weighting)
    • Signal-to-Noise Ratio 114 dB (A–weighting)
    • Total Harmonic Distortion + Noise –103 dB
  • Stereo Headphone Outputs 1 & 2
    • Jack Type ¼” Male TRS Stereo/Unbalanced
    • Frequency Response 20 Hz – 20 kHz, ±0.1 dB
Digital I/O
  • S/PDIF
    • Jack Type Phono (RCA)
    • Format IEC958
  • ADAT
    • Jack Type Optical TOSLINK JIS F05
    • Format ADAT Digital “Lightpipe” with S/MUX
    • Channel Assignments @ 44.1 kHz, 48 kHz Port 1 = Channels 1 – 8, Port 2 = 1 – 8 (mirrored)
    • Channel Assignments @ 88.2 kHz, 96 kHz Port 1 = Channels 1 – 4, Port 2 = Channels 5 – 8
    • Channel Assignments @ 176.4 kHz, 192 kHz Port 1 = Channels 1 – 2, Port 2 = Channels 3 – 4
  • Word Clock
    • Jack Type BNC
    • Lock Range ±0.5% of any supported sample rate
    • Word Clock Input Termination 75 Ohms, switchable
  • Synchronization Sources
    • Internal, Word Clock, S/PDIF, ADAT
Electrical
  • Power Supplies External AC to DC Power Supply Brick, Internal DC to DC Power Supply
  • AC Connector Type IEC Male
  • AC Requirements 100V – 240V AC, 50 – 60 Hz
  • DC Connector Type XLR 4-Pin Locking Male (Neutrik P/N NC4MDM3-H)
  • DC Requirements 12 VDC, ±5%
  • Maximum Power Consumption 6.5 amperes
Mechanical
  • Dimensions
    • Width 19”
    • Height 1.75” (1U rack space)
    • Depth, Chassis Only 12.125”
    • Depth, Including Knob & Jack Protrusions 13.5”
    • Shipping Box (Width x Depth x Height) 24” x 17” x 8”
  • Weight
    • Shipping Weight (with box & accessories) 18 pounds
    • Weight (bare unit) 9.1 pounds
JUST SEEN

Search

Just added to your cart:
Qty:
Total:
Subtotal:
Excl. postage 
My Bag
Just added to your wishlist:
Excl. postage 
My Wishlist