QSC ISA500Ti

SKU: QSC ISA500Ti
$ 911.00 -20%
$ 731.00
Wishlist

Designed as a cost-effective solution specifically for sound contractors, the ISA 500Ti have an isolated 25, 70 and 100 volt outputs for distributed audio systems. Versatile loading options and a comprehensive feature set make the ISA Series a rugged, cost-effective power solution for any permanently installed sound system.

Unique among distributed sound power amplifiers, the "Ti" versions will drive 8 or 4 ohm loads and a distributed system on the same channel simultaneously. This enables a contractor to reduce the number of required amplifier channels by allowing a limited number of distributed speakers to be attached to the same amp as is powering the main sound system.

Housed in a rugged 3-U chassis, all seven models feature rear panel gain controls for tamper resistant operation with 2 dB detents for quick and repeatable settings. Inputs include both XLR and detachable Euro-style connectors. Outputs feature covered barrier strip connectors for safety agency compliance, and for added versatility, a DataPort V2 (Version 2) terminated with an HD-15 connector is provided for use with DPV2-compatible signal processing accessories such as the XC-3 Crossover, SF-3 Subwoofer Filter, LF-3 Low Frequency Filter and the DSP-3 with external power supply.

Selectable high-pass filters are included to protect speakers and prevent speaker transformer saturation with minimal effect on program material. The ISA Series provide additional protection circuitry including DC, infrasonic, thermal overload, RF and short circuit protection.

Specifications:

8 ohms 20Hz-20kHz 0.1% THD: 260W
4 ohms 20Hz-20kHz 0.1% THD: 425W
2 ohms 1kHz 1% THD: 700W
70V or 100V 50Hz-16kHz 0.5% THD: 500W
25V 50Hz-16kHz 0.5% THD: 300W
Bridged Mono 8 ohms 1kHz 0.1% THD: 900W
Bridged Mono 4 ohms 1kHz 1% THD: 1400W
140V or 200V 50 Hz-16kHz 0.5% THD: 1000W

Specifications:

  • 8 ohms 20Hz-20kHz 0.1% THD: 260W
  • 4 ohms 20Hz-20kHz 0.1% THD: 425W
  • 2 ohms 1kHz 1% THD: 700W
  • 70V or 100V 50Hz-16kHz 0.5% THD: 500W
  • 25V 50Hz-16kHz 0.5% THD: 300W
  • Bridged Mono 8 ohms 1kHz 0.1% THD: 900W
  • Bridged Mono 4 ohms 1kHz 1% THD: 1400W
  • 140V or 200V 50 Hz-16kHz 0.5% THD: 1000W

FEATURES

  • The "Ti" version include low-impedance and isolated 25, 70, and 100 volt outputs for distributed audio systems
  • Rear panel gain controls for tamper resistant operation with 2 dB detents for quick and repeatable settings
  • XLR and detachable Euro style input connectors
  • DataPort V2 for use with DPV2-compatible signal processing accessories (XC-3, SF-3, LF-3) and DSP-3/DSP-4 (with external power supply)
  • Independent defeatable clip limiters for reduced distortion
  • Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material (50 Hz or 75 Hz)
  • Front panel indicators include power, signal, and clip
  • Covered barrier strip output connectors for safety agency compliance
  • Automatic variable-speed fan for quiet normal operation with maximum cooling on demand
  • Rear-to-front air flow keeps equipment racks cool
  • Stereo, Bridge, or Parallel operating modes
  • Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
  • 3-year warranty plus optional 3-year extended service contract

"Ti" Models

  • 25, 70, 100 volt, and low-impedance outputs available simultaneously
  • Simple barrier strip connection determines output mode
  • Fully isolated 25, 70, and 100 volt outputs
Related Products
JUST SEEN

Search

Just added to your cart:
Qty:
Total:
Subtotal:
Excl. postage 
My Bag
Just added to your wishlist:
Excl. postage 
My Wishlist