$ 6,500.00

Pure Neumann sound in the digital domain, for use with AES/EBU or AES 42. The signal is converted directly at the capsule. Difficult questions concerning the optimal preamp and A/D converter for a Neumann mic are thus a thing of the past.

Its 15 different remotely controlled directional characteristics and numerous additional features permit the D-01 to be optimally adapted to almost any recording situation. These comprehensive features demonstrate what can be achieved with digital microphone technology. The D-01 has a newly developed capsule, and is valued by users particularly for its hitherto unknown transparency and fidelity to detail.

Features

  • Extremely wide dynamic range: more than 130 dB
  • Neumann A/D conversion process
  • Pre-amps and external A/D converter are no longer necessary
  • Wide range of new functions through integrated digital signal processing
  • Control and monitoring of all microphone parameters and functions through Remote Control Software

Digital Microphone

  • A/D Converter, optimized for direct conversion of the capsule signal
  • New capsule design
  • Additional DSP functions
  • Limiter (incl. de-esser)
  • All parameters and functions remote controllable

Digital Microphone Interfaces

  • AES 42-2001 to AES/EBU conversion
  • Reliable synchronization through new PLL process
  • 2 or 8 channels
  • Phantom powering
  • Word clock in and out
  • Integrated word clock generator

Remote Control Software

  • Control and monitoring of all parameters
  • DSP function control
  • Peak level meter
  • Gain reduction bargraph for limiter
  • Save, copy, and recall for complete setups

Acoustic transducer: K 07 large double-diaphragm capsule, 
diameter 30 mm with protected internal electrodes
Directional characteristic: 15 remote controllable polar patterns, 
from omni to cardioid to figure-8

Frequency response: 20 Hz to 20 kHz
Free-field sensitivity1) 2): –44 dBFS
Equivalent noise level, CCIR3): 19 dB
Equivalent noise level, A-weighted3): 8 dB-A
Signal-to-noise ratio2), CCIR3): 75 dB
Signal-to-noise ratio2), A-weighted3): 86 dB
Maximum SPL at 0 dBFS: 138 dBSPL
Dynamic range, A-weighted3): 130 dB

Latency:
44,1/48 kHz: 52 samples
88,2/96 kHz: 61 samples
176,4/192 kHz: 121 samples (AES 3)

Supply voltage range: +6 V to +10.5 V
Current consumption: max. 220 mA
Weight: approx. 700 g, Diameter: 63.5 mm, Length: 185 mm

General Specifications of the Solution-D microphones

Interface: AES42

Remote controlled functions:
- Polar pattern4)
- Low-cut: flat, 40, 80, 160 Hz
- Pre-attenuation: 0 , -6, -12, -18 dB
- Gain: 0...63 dB in 1 dB steps, clickless
- Testsignal: 1 kHz, pink noise, white noise
- Sampling rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
- Parametric compressor/limiter (incl. de-esser function)
- Independent peak limiter avoiding any clipping
- Switch functions: soft muting, phase reverse, signal lights
- Signal lights: red4) and blue LEDs
- System functions, firmware download

A/D conversion: Neumann process (patented), 
28-bit internal word length

Digital signal processing: Fixed-point, 
variable internal word length 28 bits to 60 bits

Synchronization: 
- Asynchronous operation (free-running, AES42 - Mode 1),
basic frequency accuracy: ± 25 ppm
- Synchronous operation (AES42 - Mode 2), 
pulling range: Min. ± 100 ppm

Power supply (phantom power complying with AES42)

Output: XLR3M, 24 bits as per AES/EBU (AES3)

________________________
All data with respekt to 0 dB pre-attenuation and 0 dB gain.
1) at 1 kHz
2) re 94 dBSPL
3) according to IEC 60268-1; 
CCIR-weighting according to CCIR 468-3, quasi peak; 
A-weighting according to IEC 61672-1, RMS
4) D-01 only
Related Products
JUST SEEN

Search

Just added to your cart:
Qty:
Total:
Subtotal:
Excl. postage 
My Bag
Just added to your wishlist:
Excl. postage 
My Wishlist