New multiband Compressor / Expander developed from the popular MLA-3 with added expander functions for all frequencies.
The input signal is split into three frequency-bands. Each band is passed through a stereo compressor / expander, where gain and processing can be altered.
The outputs of the compressors / expanders are then re-combined and fed to the outputs.
There are four different frequencies for each of the two crossovers that can be separately selected for the low-to-mid and the mid-to-high bands.
The three frequency-band compressors / expanders have separate controls so that different parts of the audio spectrum can be adjusted and tuned.
With separate gain controls for each frequency-band, the MLA-4 can also be used as an equalizer.
You can always adjust the controls for the separate frequency bands to different settings. There is no technical reason why they should be the same for all frequencies.
Separate Input and Output gain controls, make the MLA-4 easy to use for different operating levels.
The MLA-4 is a powerful tool that could be used for:
- Restoring and improving over-compressed or
- uneven mixes.
- Changing the tonal balance when ordinary equalizers are unable to do the job.
- Creating exciting new sounds with the unique linking that combines compression and expansion.
|Input Impedance||100 kohm|
|Maximum input level||+29dBu (0dBu = 0.775V)|
|Thresholds (0dB input gain)||-10dBu to +20dBu|
|Typical THD (ratio 1:1)||<-90dB|
|Frequency Response||within 0.05dB 20Hz to 20kHz|
|Bandwidth||greater than 1Hz to 500kHz|
|Maximum Output level||+28dBu|
|Output impedance||33 ohm|