Lab Gruppen FP 14000

SKU: Lab Gruppen FP 14000
$ 5,440.00
Wishlist

Over the past decade, the tight and transparent sound of Lab.gruppen touring amplifiers has earned the praise of renowned FOH engineers and leading sound rental companies worldwide. FP 14000, the new flagship model of the FP+ Series, advances this tradition by further augmenting effective power output to effortlessly handle extreme low-frequency loads.The Regulated Switch Mode Power Supply (R.SMPS) has been updated to provide more sustained high power during extended bursts of low frequency content, while at the same time ensuring stable rail voltages even with wide fluctuations of external mains voltage. The forceful, high-current (83 A peak) output stage relies on Lab.gruppen’s patented Class TD topology, a breakthrough in amplifier technology that approaches the efficiency of Class D while retaining the sonic purity of proven Class B designs. A highly refined and efficient circuit layout further optimizes the interaction of R.SMPS and Class TD to produce the unprecedented power density of the FP 14000. 

To keep its cool under extreme demands, the FP 14000 relies on Lab.gruppen’s proprietary Intercooler. This innovation uses thousands of copper fins to multiply the exposed heatsink surface’s rapid heat dissipation. Also, all output devices are mounted transverse to the airflow for uniform cooling. As a result, the FP 14000 delivers Lab.gruppen’s’ trademark “all the power, all the time” with no degradation of sonic performance.

To maximize headroom in any application, the FP 14000 offers adjustable input gain along with Lab.gruppen’s exclusive Voltage Peak Limiter (VPL). Adjustable on a per-channel basis, VPL optimizes the output for any load, from a single massive subwoofer to a series of HF compression drivers.

The comprehensive warning and protection features on the FP 14000 safeguard output circuits and connected loads while also extending amplifier life and minimizing the chance of service interuptions Whether it’s a matter of faulty wiring, improper use, or extreme ambient temperatures, the FP 14000 gives clear indication of any problems. Automatic protection measures engage only at critical thresholds. Operating conditions are re-checked every six seconds and, if a fault is detected, normal operation is resumed when measurements return to nominal.

The FP 14000 is shipped with a NomadLink network interface as standard. In conjunction with DeviceControl software, NomadLink allows comprehensive monitoring of amplifier status (including fault or warning indications) and also enables remote control of power on/off, channel mute, and channel solo functions. NomadLink is compatible with popular third-party control platforms; a separate NLB 60E NomadLink Bridge & Network Controller is required.

General
Number of amplifier channels 2
Peak total output all channels driven 14000 W
Peak output voltage per channel 195 V
Max output current per channel 90 A peak
Max output power (all channels driven)
2 ohms 7000 W
4 ohms 4400 W
8 ohms 2350 W
16 ohms 1200 W
Max output power bridged
2 ohms Not recommended 1
4 ohms 14000 W
8 ohms 8800 W
16 ohms 4700 W
Performance
THD 20 Hz - 20 kHz at 1 W <0.1%
THD at 1 kHz and 1 dB below clipping <0.05%
Signal to Noise Ratio >112 dBA
Channel separation (Crosstalk) at 1 kHz >70 dB
Frequency response (1 W into 8 ohms) + 0 / -3 dB 2 Hz - 34.2 kHz
Output impedance @ 100 Hz 19 mOhm
Gain, Sensitivity and Limiters
VPL, selectable per ch 195, 170, 140, 116, 100, 80, 66, 54 V
VPL, when bridged 2 390, 340, 280, 232, 200, 160, 132, 108 V
Voltage Peak Limiter mode (per ch.) Hard / Soft
Amplifier gain selectable (all channels) – rear-panel switches 2 23, 26, 29, 32, 35, 38, 41, 44 dB
Default gain 38 dB
Level adjustment (per channel) Front-panel potentiometer, 31 position detented from -inf to
Connectors and Buttons
Input connectors (per ch.) 3-pin XLR, electronically balanced
Output connectors (per ch.) Neutrik speakON / binding post
Output bridge mode A+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source
NomadLink network On board, 2 x RJ45 connectors IN and OUT
Intelligent fans (on/off) Yes, depending on presence of output signal
Power on/off and Remote enable on/off Individual switches on front-panel
Cooling Dual fan, front to rear airflow, no filter required, temperature controlled speed
Front-panel user interface
Common NomadLink Network; Power Average Limiter (PAL)4; Power on
Per channel Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute
Power
Operating voltage, 230 V / 115 V nominal 3 130-265 V / 65 -135 V
Minimum power-up voltage, 230 V / 115 V 171 V / 85 V
Power Average Limiter (PAL) 4 Yes
Soft-start / Inrush Current Draw Yes / max. 5 A
Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
Dimensions
Dimensions W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”)
Weight
Weight 12 kg (26.4 lbs)
Finish
Finish Black painted steel chassis with black painted steel / aluminum front
Approvals
Approvals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC
Related Products
JUST SEEN

Search

Just added to your cart:
Qty:
Total:
Subtotal:
Excl. postage 
My Bag
Just added to your wishlist:
Excl. postage 
My Wishlist