Genelec 1238DF M

SKU: Genelec 1238DF M-Single
$ 6,995.00 -10%
$ 6,295.00
Wishlist

Genelec 1238DF M

2 x 8" LF/500W, 5" MF/250W, 1" HF/200W. Remote RAM-L Amplifier

The 1238DF is based on the successful 1238CF electro-acoustic design, combined with Genelec state of the art AutoCal™ and Genelec Loudspeaker Manager (GLM™) control network technologies. GLM allows to automatically align every monitor on the network in terms of level, timing, and equalisation of room response anomalies. Typically flush mounted, the 1238DF includes a large Directivity Control Waveguide (DCW ™) providing a wide, controlled listening area, minimizing early reflections for very accurate sound reproduction on- and off-axis. The Remote Amplifier Module RAM L feature the most modern electronic technologies for high performance monitoring.

The 1238DF is perfect for music recording studios, film and video post-productions, broadcast facilities and mastering suites.

Requires GLM V2.0 User Kit - Sold Separately

 

 

       

      • Lower cut-off frequency, –6 dB: < 55 Hz
      • Upper cut-off frequency, –6 dB: > 20 kHz
      • Accuracy of frequency response, ± 1.5 dB: 57Hz–20kHz
      • Maximum short term sine wave acoustic output,100 Hz to 3 kHz at 1 m: >117 dBSPL
      • Maximum long term RMS acoustic output at 1 m: > 107 dB SPL
      • Maximum peak acoustic output per pair, at 2 m: > 124 dB
      • Self generated noise level, at 1 m (A-weighted): < 10 dB
      • Harmonic distortion at 90 dB SPL at 1 m: < 0.5 %
      • Bass driver (magnetically shielded): 8 in cone
      • Midrange driver (magnetically shielded): 5 in cone
      • Treble driver (magnetically shielded): 1 in metal dome
      • Weight (monitor encloser): 79 lb (36 kg)
      • Weight (amplifier): 13 lb (6 kg)
      • Dimensions (monitor encloser): 24”, 18 1/2”, 10 1/8”
      • Dimensions (amplifier): 3 1/8 ", 16 3/4", 9 15/16"
      • Bass amplifier short term output power: 500 W
      • Midrange amplifier short term output power: 250 W
      • Treble amplifier short term output power: 200 W
      • Amplifier system THD at nominal output: <0.01%
      • System Signal to Noise ratio, A-weighted: > 115 dB
      • Mains voltage: 100-240 VAC, 50/60 Hz
      • Mains voltage operating range: -10 to +10 %
      • Power consumption (Standby, idle, full output): <0.5 W, 25 W, 750 W
      • Analog input: XLR, balanced 10 kOhm
      • Maximum analog input signal: +25.0 dBu
      • Analog input sensitivity (100 dB SPL at 1 m): -6 dBu
      • Analog input gain selection: 0, +6, +12, +18 dB
      • Digital input: XLR female 110 Ohm, AES/EBU Single Wire
      • Digital output/thru-put: XLR male 110 Ohm, AES/EBU Single Wire
      • Digital input word length: 16 - 24 bits
      • Digital input sample rate: 32 - 192 kHz
      • Digital input sensitivity (100 dB SPL at 1 m ): -30 dBFS
      • Digital input gain selection: 0, +6, +12, +18 dB
      • Control network type: Proprietary GLM network
      • Control network connection: 2 RJ45, CAT5 cables
      • Crossover frequency: 420 Hz, 3 kHz
      • GLM notch filters: 4 LF and 2 HF
      • GLM shelving filters: 2 LF and 2 HF
      • System room response calibration: Genelec GLM AutoCal
      JUST SEEN

      Search

      Just added to your cart:
      Qty:
      Total:
      Subtotal:
      Excl. postage 
      My Bag
      Just added to your wishlist:
      Excl. postage 
      My Wishlist