Dynaudio Acoustics M3VE-PLM PACK

SKU: Dynaudio Acoustics M3VE-PLM PACK
$ 39,000.00 -33%
$ 26,000.00

Includes 2 x M3VE and 1 x PLM10000Q

The Dynaudio Professional M3VE monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor - the renowned M3A 3-way monitor. Two speakers are powered by a single four channel Lab.gruppen PLM 12k44 amplifier, using the integrated Lake active cross-over between LF and MF, while passively filtering the MF/HF cross-over point.

With Dynaudio ESOTAR² driver technology, M3VE takes over where most other monitor systems give up. Attention to detail, underpinned by a 22Hz - 21kHz frequency response and beyond 133dB SPL, M3VE leaves no room for desire in terms of resolution, range or power.

PLM Series Amplification

The PLM Series (Powered Loudspeaker Management) includes the world’s most powerful four-channel amplifier platform in the industry-leading digital sound manipulation features of Lake Processing. The result is a seamlessly unified sound reinforcement core that offers unprecedented flexibility, pristine digital filtering and delay, plus effortless ability to drive difficult loads. When compared to conventional approaches using separate components, the PLM Series affords significant advantages in sonic performance, user functionality, rental inventory utilization, and long-term cost savings




    • System: 3-way Active Main Monitor
    • Frequency Response (+/- 3 dB): 22 Hz - 21 kHz
    • Peak SPL 1m, pair (IEC Short Term): > 133 dB peak
    • Amplifier minimum: 2 x Lab.gruppen PLM10000Q
    • Resonance Frequency: 24 Hz
    • Internal Cabinet Volume: 145 liters
    • Bass Principle: Bass reflex
    • Amplifier: 1/2 Lab-gruppen PLM10000Q (2 channels pr speaker). Preset: M3VE V05
    • Tweeter: Esotar² 28 mm soft dome Magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material
    • Midranges: 15 cm with 75 mm diameter pure aluminum wire voice coil, one-piece molded MSP cone
    • Woofer: Esotar 30 cm with 75 mm diameter pure copper wire voice-coil, MSP-cone, long stroke
    • Weight: 143 lbs (65 kg)
    • Dimensions (WxHxL): 555 x 775 x 505 mm
    • Cabinet: 25mm MDF, strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer.
    • Crossover: Woofers/hightone: active dsp-based, in-amp Lake processor. Midrange/tweeter: passive wir air-coils only, low dielectrium capacitors and zero-compression resistors.

    Amplifier Specifications

    • Model: 12k44
    • Number of amplifier channels: 4
    • Max out Power per Channel (4 ohms, all channels driven): 3000 W
    • THD + N at 1 kHz and 1 dB below clipping: < 0.04 %Dynamic Range:> 114 dB
    • Channel separation (Crosstalk) at 1 kHz: > 70 dB
    • Inputs: Analog, AES/EBU & Dante
    • Analog Input Sample Rate / Resolution: 96 kHz / 24 bit
    • Weight: 36 lbs (16.5 kg)
    • Dimensions (WxHxD):483 mm (19"), H: 88 mm (2 U), D: 424 mm (16")


    Just added to your cart:
    Excl. postage 
    My Bag
    Just added to your wishlist:
    Excl. postage 
    My Wishlist