The ASI provides a link between Pro64® Series networking products and Pro16® Series output devices, such as the A320 Personal Mixer, A360 Personal Mixer, A-16II Personal Mixer and A-16R Personal Mixer.* The ASI features two Pro64 network ports and four Pro16 output ports, all using heavy duty locking Neutrik EtherCon connectors.
The ASI is very simple to configure. The incoming Pro64 stream is broken into 16-channel blocks and transmitted out to the four Pro16 ports. To further customize the content for each port, use the free Pro64 Network Manager software that allows any Pro64 network Slot to be assigned to any Pro16 channel.
The number of available network channels is determined by the sample rate of the Pro64 network (64 channels at 44.1/48kHz±, 32 at 96kHz±, and 16 at 192kHz±). Stereo link settings from the Pro64 network are passed to the Pro16 outputs for use with Personal Mixer products.
The Pro16 outputs of the ASI A-Net Systems Interface can be connected directly to the A360, A320, A-16II or A-16R Personal Mixers, to a Pro16 A-Net Distributor, or to an AN-16/o v.4 or AV-P2 Output Module.
* Important Note: The original A-16 Personal Mixer (discontinued 2004) is not compatible with the ASI. Some early A-16R Personal Mixers built prior to the release of the Y1 card are also not compatible. Contact Customer Service for additional compatibility info.
ASI Technical Specifications
|LED Indicators||Pro64 Sample Rate
Pro16 Available Outputs (4)
|Pro64 A-Net||2 EtherCon RJ45 connectors, rear panel|
|Pro16 A-Net Output||4 EtherCon RJ45 connectors, rear panel|
|Pro64 Sample Rates||39.7-52kHz; 79.4-104kHz; 158.8-208kHz||24-bit resolution|
|Pro16 Sample Rates||39.7-52kHz||24-bit resolution|
|Latency||Analog in (Pro64) to analog out (Pro16): <1ms|
|Power Supply||100-240VAC||50-60Hz, 24W|
|Internal switching type; IEC connector|
|Dimensions||1U: 19"w x 8"d x 1.75"h (482.6 x 203 x 44 mm)|
|Weight||5.5 pounds (2.49 kg)|