The 2U 6416i can insert up to 16 line-level analog sources into a Pro64 digital snake or audio network system. Audio connected to the 6416i is converted to A-Net digital data and inserted into the Pro64 network. Each channel includes a four-position gain switch with three-segment LED level metering, and individual channel activation switches. Adjacent channels can be linked as a stereo pair. Audio thru connections are provided via DB25 multipin connectors on the rear panel.
Each 6416i can be configured to operate within one of four 16-channel channel/slot ranges within the Pro64 network or assigned to the network's matrix using the Pro64 Network Manager software, making complex installations easy to configure and manage. Each input channel of a 6416i can be made active and inserted into the network as needed.
The Pro64 A-Net network supports three ranges of variable sample rates: 44.1/48kHz±, 96kHz±, and 192kHz±. No matter the sample rate, all 16 input channels on the 6416i are available for use. All audio is streamed at 24-bit resolution with no data compression at any time.
In addition to its audio capabilities, the 6416i also includes the innovative Virtual Data Cables™for simultaneously distributing up to 14 channels of non-audio control data such as MIDI, RS-232, and GPIO to any device on the Pro64 network. Every Pro64 I/O module comes with its own set of VDC™ ports that can be individually configured.
The 6416i can also be used as inputs into a Pro16 personal mixing system (an ASI A-Net Systems Interface module is required).
6416i Technical Specifications
|Channels||16 inputs||Line level|
|XLR Inputs||Pin 1: Shield; Pin 2: Hot; Pin 3: Cold|
|Audio Thru; Alt. In||DB25 multipin, x2; audio pinout|
|Input Impedance||3k ohms|
|Input Gain Range||+6, 0, -6, -14 (dB); 4-position switch|
|Max. Input Level||+18dBu|
|Sample Rates||1x: 39.7-52kHz;
|-3dB: 2Hz and 23kHz
±0.5dB: 3Hz?22kHz (at 1x sample rate)
|THD +N||< .002% at -10dBFS|
|Signal to Noise||A/D: -111dB (unweighted)|
|Crosstalk||<100dB at 1kHz|
|Latency||Analog input to analog output: <800µs|
|A-Net||2 EtherCon® RJ45 connectors|
|A-Net Cable Length||400 feet (120 meters) between devices|
|Virtual Data Cables||MIDI In, MIDI Out; 5-pin DIN|
DB9 connector; DIP switch configuration
In (x4), Out (x4); terminal block connectors;
DIP switch configuration; TTL or isolated
|Power Supply||100-240VAC||50-60Hz, 24W|
|Internal switching type; IEC connector|
|Dimensions||2U; 19"w x 8"d x 3.5"h (482.6 x 203 x 88 mm)|
|Weight||9 pounds (4.1 kg)|