Apogee Symphony 8 Mic Pre Amp Module

SKU: Apogee Symphony A8MP
$ 1,495.00
Wishlist

Apogee Symphony 8 Mic Pre Amp Module

8-channel mic preamp with 4 instrument DIs and 8 inserts

The A8MP from Apogee is a module for the company's Symphony system that enhances the system's analog input by adding 8 microphone preamps. Additionally, up to 4 instrument inputs can be connected directly to the module and twin D-Sub connectors deliver 8 fully balanced inserts points.
Microphones do not connect directly to the Mic Preamp Module. They must be connected to the analog inputs of an analog I/O Module that has been installed in slot 1 of the Symphony chassis. The microphone preamps are then enabled in the Maestro software. Phantom power can also be enabled individually from the software.

Features

  • 8 digitally controlled microphone preamps
  • 4 Hi-Z instrument inputs
  • 8 software assignable inserts
  • 85dB gain
  • Upgrades functionality of existing Symphony I/O line inputs
  • Creates a direct connection between the Mic Preamp Module and Analog I/O Module by
  • inserting a mic preamp stage before the line inputs
  • Ultra low noise
  • Completely controllable via Maestro software
  • Selectable +48V phantom power, Soft Limit, and phase invert

     

      Specifications

      • ADC: 24-bit
      • Sample Rates: Up to 192kHz
      • Analog In
        • 4 x 1/4" TS phone
        • 1 x 25-pin D-Sub Insert Returns (requires optional breakout cable)
      • Input Impedance: 10kΩ
      • Maximum Input Level: +4dB setting: +24dBu, -10dB setting: +6dBV
      • Analog Outputs: 1 x 25-pin D-Sub Insert Sends (requires optional breakout cable)
      • Output Impedance: 25Ω
      • Maximum Output Level: ∞ to +24dBu
        • 1 x 25-pin D-Sub (requires optional breakout cable) shared with output
        • 1 x RCA coaxial S/PDIF
        • 2 x TOSLink optical ADAT or S/PDIF
      • Dynamic Range: A/D: 120dB, A-weighted, D/A: 129dB, A-weighted
      • THD + N: A/D: -113dB @ 20dBu (0.00024%), D/A: -117dB @ 20dBu (0.00014%)
      • Frequency Response: A/D: 1Hz to 20kHz (+/-0.05dB)@ 44.1kHz, D/A: DC to 20kHz (+/-0.05dB)@ 44.1kHz
      • Word Clock: On chassis
      • Power Requirements: From chassis
      • Dimensions (WxDxH): Fits slot on chassis
      JUST SEEN

      Search

      Just added to your cart:
      Qty:
      Total:
      Subtotal:
      Excl. postage 
      My Bag
      Just added to your wishlist:
      Excl. postage 
      My Wishlist