SKU: ADAM S7A MK2-Single
$ 27,999.99


The S7A Mk2 is the 'big brother of the S6X and ADAM's most spectacular studio monitor to date. With a whopping combined 1500 W of onboard power (rms), this monitor reaches SPL peaks of 128 dB at a distance of 1 meter. The big bass diaphragms produce even more volume even at lowest pitches down to 20 Hz.

Both 15" subwoofers are driven by 500 W rms each, while 250 W rms units are powering all the other frequency bands.

The main monitors Adam S7A Mk2 and S6X are designed for large control rooms and film studios. They present a completely new, impressive concept: to transport the unique realism of the ADAM monitors at a very high SPL level. In accordance with ADAM's main goal to achieve the best possible authenticity in music reproduction, any overemphasis of the bass frequencies should be avoided. Furthermore, it is essential for neutral sound characteristics at high volumes to achieve a wide dispersion in the horizontal plane and a somewhat narrower dispersion in the vertical plane, thus reducing reflections from the ceiling, the floor or a mixing console. Less reflection means superior imaging and better localization, facilitating the best possible transportability of mixes across the widest range of playback systems.

Advanced D'Appolito-array
The arrangement of the seven discrete loudspeakers facilitates a gradual transition of the chassis dimensions. One of the most important aspects of these monitor's new approach is the horizontal symmetry of the drivers, which could be referred to as advanced D'Appolito array. If the drivers are filtered properly there are - besides the dispersion characteristics mentioned previously - two more advantageous results:

There is an absence of any sudden change in directivity with frequency, leading to harmonic dispersion behavior throughout the audio band. The absence of sudden changes in directivity is not visible in a frequency plot, but clearly audible - especially with a full range of materials, from single complex sources such as the human voice to the wide sonic palette of large orchestras.
The dynamic capabilities of the monitor are distributed over the audio band more equally, and louder recording or mixdown sessions with SPL's of 120 dB are handled without offending the ear.

Impulse Coupling
In order to get a precise and undistorted reproduction, all drive units are mounted on an ultra stiff 25 mm thick aluminum honeycomb plate, which is acoustically dead - thereby providing an extremely mechanically stable bridge to the cabinet (IC). As the drivers are much better fixed this way their time behavior (and consequently their clarity) is audibly and measurably improved.

Both the S6X and the S7A Mk2 ADAM use the new generation of switching amps and power supplies. These are combined in an extremely powerful (1000 and 1500 W rms respectively) yet cool amplifier assembly. Together with the built in overload protection circuits these amplifiers will run reliably and at constant safe operating temperatures not possible with conventional designs. The amplifiers are of extremely low output impedance, leading to a damping factor >4.000, enabling them to strictly control the motion of the drive units.

The Front Panel
Numerous controls on the front panel introduce a new degree of control for main monitors.

Along with the input gain, there are level controls for each of the four drivers, shelving filters on both ends of the frequency spectrum, and three full parametric EQs (20-200HZ) that can be used to combat standing waves in the control room. The EQ can be bypassed individually or as a group so that their overall effect can be analyzed in direct comparison to the unaffected signal.

In large film score mixing rooms, it may be desirable to have a representation of the sound in the theaters. To meet the ISO 2969 Standard, the Dolby™ X-curve has to be applied.

Using pink noise, the X-curve engages a 3 dB per octave roll-off above 2 kHz. Both the S6X and S7A Mk2 have a switch that activates this filter, eliminating the need for external processing during the film mix.

The Benchmark
Quite simply, we feel that the S7A Mk2 is the benchmark of what is possible in the state of the art full range active professional monitoring. It incorporates all of the ADAM inventions and designs, as well as the best materials available. This fusion of power and capacity with precision and accuracy results in unparalleled performance in professional monitoring.

The S7A Mk2 is ADAM's contribution to the best possible studio monitor available. The proof is in the listening - we encourage you to hear for yourself.


    Number 2
    Basket Ø 15" (380 mm)
    Voice coil Ø 4" (100 mm)
    Cone material Paper
    Number 2
    Basket Ø 9" (228 mm)
    Voice coil Ø 2" (50 mm)
    Cone material HexaCone
    Number 2
    Type X-ART
    Cone material HexaCone
    Diaphragm area 26 inch² (16800 mm²)
    Equiv. Diaphragm Ø 5.5" (146 mm)
    Velocity transform ratio 3.5:1
    Diaphragm weight 0.7 g
    Number 1
    Type X-ART
    Diaphragm area 4 inch² (2420 mm²)
    Equiv. Diaphragm Ø 2" (56 mm)
    Velocity transform ratio 4:1
    Diaphragm weight 0.17 g
    Built-in Amplifiers  
    Subwoofer 1
    Type PWM
    Amp. power RMS / music 1000 W / 1400 W
    Subwoofer 1
    Type PWM
    Amp. power RMS / music 500 W / 700 W
    Woofer 1
    Type PWM
    Amp. power RMS / music 500 W / 700 W
    Woofer 1
    Type PWM
    Amp. power RMS / music 250 W / 350 W
    Midrange 1
    Type PWM
    Amp. power RMS / music 250 W / 350 W
    Tweeter 1
    Type PWM
    Amp. power RMS / music 250 W / 350 W
    Control panel  
    Input Sensitivity ±10 dB
    EQ 80 Hz (Quality / Hz / Level) 3 x 0.2 - 20 / 20 - 200 / ±12 dB
    High Shelf EQ > 6 kHz ±6 dB
    Low Shelf EQ < 150 Hz ±6 dB
    Sub Gain ±4 dB
    Mid-Woofer Level ±2 dB
    Mid level ±2 dB
    Tweeter gain ±4 dB
    Input connectors  
    Analog XLR
    Location Front / Rear switchable
    General data  
    Panel Front
    X-Curve-Filter yes
    Frequency response 20 Hz - 50 kHz
    THD > 80 Hz ≤0.5 %
    Max SPL with sine wave acoustic 100Hz to 3kHz at 1m ≥128 dB
    Max SPL per pair at 1m ≥138 dB
    Crossover frequencies 65 / 800 / 3100 Hz
    Input impedance 10 KOhm
    Weight 575.4 lb (261 kg)
    Height x Width x Depth 35.5" (900 mm) x 47" (1200 mm) x 26.5" (670 mm)
    Warranty 5 Years
    Delivery contents

    Power cord, Manual



    Just added to your cart:
    Excl. postage 
    My Bag
    Just added to your wishlist:
    Excl. postage 
    My Wishlist