ADAM S4X-H

SKU: ADAM S4X-H-Single
$ 5,999.99
Wishlist

ADAM S4X-H

The ADAM S4X-H midfield monitor combines the X-ART tweeter with a 5" HexaCone midrange and two redeveloped 9" HexaCone woofers.

Each of the woofers and midrange drivers are driven by a 250 W ICE module. To allow the X-ART tweeter to extend to its highest frequencies, it is combined with a unique ADAM Audio A/B amplifier. This unique amplifier has ultra low distortion and an immense internal bandwidth of more than 1MHz. Combine this amplifier with the X-ART tweeter and you get a fascinating sound that is effortless and of highest resolution.

Improperly designed larger monitors are always at risk at compromising the overall sound with bass reproduction that is too intense. As in all ADAM Audio designed speakers, both versions of the S4X have been designed to combine both the power and volume of the bass (28 Hz at -3 dB point) with the highest possible precision. Combine this with the transparent high and midrange frequencies of the S4X and this will give an engineer a new quality level of control and performance for larger rooms.

All models of the SX-Series are equipped with the new X-ART tweeter. The X-ART tweeter has a 4dB higher efficiency, a 3dB higher maximum sound pressure level, and an increase in frequency response up to 50 kHz. The newly designed broadband A/B amplifier has been developed by ADAM to perfectly match the needs and capabilities of the X-ART tweeter. The entire range of sound can be heard as never before.

The new HexaCone woofers are designed with larger and longer voice coils that deliver more linear excursion for higher SPL max. values. A stronger magnetic structure is added as well for an optimum in efficiency and accuracy.

Optional digital input and magnetic shielding

All SX-models (except the S1X) can be optionally retrofitted with a 24 bit/192 kHz D/A Converter featuring an AES/EBU (XLR) and a SPDIF (RCA) inputs as well as a R/L/Mono switch.

 

 

      Woofer  
      Number 2
      Basket Ø 9" (228 mm)
      Voice coil Ø 2" (50 mm)
      Cone material HexaCone
      Midrange  
      Number 1
      Type Cone driver
      Basket Ø 6" (156 mm)
      Voice coil Ø 1.5" (37 mm)
      Cone material HexaCone
      Tweeter  
      Number 1
      Type X-ART
      Diaphragm area 4 inch² (2420 mm²)
      Equiv. Diaphragm Ø 2" (56 mm)
      Velocity transform ratio 4:1
      Diaphragm weight 0.17 g
      Built-in Amplifiers  
      Woofer 2
      Type PWM
      Amp. power RMS / music 250 W / 350 W
      Midrange 1
      Type PWM
      Amp. power RMS / music 250 W / 350 W
      Tweeter 1
      Type A/B
      Amp. power RMS / music 50 W / 100 W
      Control panel  
      Input Sensitivity (coarse) -20 to +8 dB (4 dB steps)
      Input Sensitivity (fine) -1.5 to +2 dB (0.5 dB steps)
      EQ 80 Hz 0 to +6 dB (1 dB steps)
      High Shelf EQ > 6 kHz ±4 dB (1 dB steps)
      Low Shelf EQ < 150 Hz ±4 dB (1 dB steps)
      Tweeter gain ±2 dB (0.5 dB steps)
      Input connectors  
      Analog XLR
      Digital (optional) AES/EBU / SPDIF / word clock
      General data  
      Panel Front
      Frequency response 28 Hz - 50 kHz
      THD > 80 Hz ≤0.6 %
      Max SPL with sine wave acoustic 100Hz to 3kHz at 1m ≥118 dB
      Max SPL per pair at 1m ≥128 dB
      Crossover frequencies 280 / 2800 Hz
      Input impedance 10 KOhm
      Weight 71 lb (32,2 kg)
      Magnetically shielded No
      Height x Width x Depth 14" (360 mm) x 27.5" (700 mm) x 17.5" (450 mm)
      Warranty 5 Years
      Delivery contents

      Power cord, Manual

      JUST SEEN

      Search

      Just added to your cart:
      Qty:
      Total:
      Subtotal:
      Excl. postage 
      My Bag
      Just added to your wishlist:
      Excl. postage 
      My Wishlist